STANDARD SPECIFICATIONS 

DIMENSIONS: Length 12200mm (40’) x 2500mm (8’ 2 ½”) wide. Deck height designed to suit turntable height of prime mover.
CHASSIS: Fabricated ‘I’ Beam with130mmx 12mm top flange and 130mm x16mm bottom flange.
SAFETY CABLES: Spring tensioned, plastic coated safety cable connected between front and rear twist lock brackets each side of trailer.
CROSSMEMEBERS: 100mm x 45mm RSJ with bolted-in 150 UC 30.0 and 200 UB 25.4 container beams to suit 1 x 40ft, 2 x 20ft, or 1 x 20ft.
Option: Extra pairs of 1 x 20ft. Beams.
FLOOR: 3mm chequer cover plate over skidplate and suspension areas.
AXLES: York Model 2782 – 20” Spider.
Option: Various Axle brands and models available.
TYRES: Nil. (Range available).
RIMS: Nil. (Range of steel spider, 10 stud steel or aluminum rims available).
SUSPENSION: York MT75 8’1” Spring Tri-axle cast steel overslung.
Option: Various spring or air suspension brands available.
KING PIN: 50mm Jost bolt in (D-value 190kN) with bolt-on turntable block.
BRAKES: Air brake Corp Tri-axle to ADR 38/02 specifications.
Option: Road train brake kit.
LANDING LEGS: Jost A400 Series
TYRE CARRIER: Dual type with chains, hinged on rubber bushes.
TOOLBOXES: Additional toolboxes may be fitted.
WATER TANK: One X 60 litre galvanized.
Option: Plastic water tank available.
MUDGUARDS: Pressed steel guards over suspension and pressed aluminum tread plate mudguards with mudflaps front and Rear of suspension.
LIGHTS: Lights (wired in conduit), Reflectors, and Rear Marker Plates conforming to all relevant Australian Design Rules.
PAINT: Trailer is deburred and fully sandblasted prior to painting with Etch Primer undercoat and PPG 2K-finish coat to Fleet or Customer colours (with scrollwork to suit).
Option: Various finishes are available including Metallics, Clear Over Base, and Chemical resistant paints.
OTHER OPTIONS: Hubodometer, Spray Suppressant Plastic Mudguards and Flaps, Ringfeeder (bracket only or complete), Spare Tyre Clamp.

 

THESE SPECIFICATIONS ARE A GUIDE ONLY, AS EACH RHINO TRAILER CAN BE DESIGNED AND MANUFACTURED TO SUIT THE CUSTOMER’S SPECIFIC REQUIREMENTS

57 - 75 Industrial Avenue, Toowoomba, QLD, 4350                                                                  (07) 4634 7767 

Website Design by M Business & Marketing Solutions