STANDARD SPECIFICATIONS

DIMENSIONS:

Length up to 12500mm (41’) x 2500mm (8’2.5”) wide. Deck height designed to suit turntable height of prime mover

CHASSIS: 310 UB
COAMING RAILS: 125mm x 65mm RSJ with 25 N.B. pipe tall rail.
Option: 150mm UB.
CROSSMEMBERS: 100 x 100 x 0.9 RHS and 100mm x 45mm RSJ.
FLOOR: 3mm crimped lyten sheet with 12mm round fixed grating across top of crimps allowing wash through from front to rear.
AXLES: York Model 2782 – 20” Spider.
TYRES: 11R22.5 16 ply. (Range available).
RIMS 8.25 x 22.5 tubeless. (Range of steel spider, 10 stud steel or aluminum rims available).
SUSPENSION: York MT75 10’1” Spring Tri-axle cast steel overslung.
Option: Various spring or air suspension brands available.
KING PIN: 50mm bolt in (D value 190kN) with bolt on turntable block.
BRAKES: Air brake Corp Tri-axle to ADR 38/02 specifications.
Option: Road train brake kit.
LANDING LEGS: Jost A400 Series
TYRE CARRIER: Dual type with chains, hinged on rubber bushes.
TOOLBOXES: One x 1200mm lockable type with spring loaded catches. One X 1200m dog box with air vent and spring loaded catches.
Option: 1200mm dog box with air vent and spring loaded catches. Additional toolboxes may be fitted.
WATER TANK: One X 60 litre galvanized.
Option: Plastic water tank available.
MUDGUARDS: Pressed aluminum tread plate guards with mudflaps front and rear of suspension.
Option: Plastic mudguards with spray suppressant or side plates fitted with spray skirt available.
LIGHTS: Lights (wired in conduit), Reflectors and rear marker plates conforming to all relevant Australian Design Rules. LED side marker lamps and taillamps.
PAINT: Trailer is deburred and fully sandblasted prior to painting with 2 pak chemical resistant undercoat and PPG 2K finish coat to Fleet or custom colors (with scroll work to suit). 
Option: Various finishes are available including metallics, clear-over-base and chemical resistant paints.
OTHER OPTIONS: Hubodometer, Spray Suppressant Mudguards and Flaps, Ringfeeder (bracelet only or complete), Belly Tank, Four Tyre Carrier, Spare Tyre Clamps, Drain Holes in Floor.

 

THESE SPECIFICATIONS ARE A GUIDE ONLY, AS EACH RHINO TRAILER CAN BE DESIGNED AND MANUFACTURED TO SUIT THE CUSTOMER’S SPECIFIC REQUIREMENTS

57 - 75 Industrial Avenue, Toowoomba, QLD, 4350                                                                  (07) 4634 7767