Smoothbulk2

Smoothbulk3

Smoothbulk4

STANDARD SPECIFICATIONS

DIMENSIONS: Length 10365mm (34’) x 2500mm (8’ 2 ½”) wide.
CHASSIS: Fabricated Hi Tensile ‘I’ Beam.
WALLS &FLOOR: 6’ x 2.5mm Lyten Smooth.
TOP RAILS: RHS with rubber bushed spreader bars and tarp bow pockets.
AXLES: Hendrickson Intraax 127mm Rnd Dual 10 Stud 285 PCD Centirfuse Drums / Alloy Hubs.

TYRES:

12 x Advance 11R22.5.
RIMS:

12 x 10 Stud 285 PCD 8.25 x 22.5 Aluminium Machine Finish Disc Wheels.

SUSPENSION:

Hendrickson Intraax 8’1” Tri-axle Air w/- Air Gauge

KING PIN:

50mm bolt-in (D-value 190kN with bolt-on turntable block).

BRAKES:

Air Brake Corp Tri-Axle to ADR 38/02 Specifications.
LANDING LEGS: Jost 2 Speed.
MUDGUARDS: Steel Guards with Mudflaps over Suspension.
TAILGATE: Two-Way Opening with Single Grain Door, Limiting Chains, Airlock and Chute and Fold Over Locks.
HOIST: 45 tonne – 4 stage.
LIGHTS: Lights (wired in loom), Reflectors, and Rear Marker Plates conforming to all relevant Australian Design Rules. LED side markers and taillights.
PAINT: Trailer is deburred and fully sandblasted prior to painting with Etch Primer undercoat and PPG 2K finish coat to Fleet or Customer colours (with scrollwork to suit).
ROLL-UPTARP: Heavy duty PVC w/- re enforcing and full-length ridgepole.
TOOLBOX: 1 of 1000 x 530 x 500 w/- Stainless Steel ‘T’ Handles
TYRE
CARRIER:
Dual Swinging w/- Clamps
WATERTANK: 1 of 60 Litre Plastic
TARE: Estimated Tare 6.6 tonne

THESE SPECIFICATIONS ARE A GUIDE ONLY, AS EACH RHINO TRAILER CAN BE DESIGNED AND MANUFACTURED TO SUIT THE CUSTOMER’S SPECIFIC REQUIREMENTS

57 - 75 Industrial Avenue, Toowoomba, QLD, 4350                                                                  (07) 4634 7767