Stockcrate-2-Deck-Aluminium-Sided-B-Double

Stockcrate-2-Deck-Aluminium-Sided

Stockcrate-2-Deck-Steel-Sided3

STANDARD SPECIFICATIONS

 

DIMENSIONS: Length up to 12400mm (40’8”) x 2500mm (8’ 21/2”) wide. 4.6m Overall height including trailer. Deck heights designed to suit turntable height of prime mover
SIDES: Heavy-duty aluminum headboard extrusion. 2x RHS climbing rails running complete length of crate both sides
Option: 3mm aluminum flat sheeting.
FLOOR: 3mm crimped lyten sheet with 12mm round fixed grating across top of crimps. Crimps run across full width of trailer.
Option: 3mm crimped lyten sheet with drain full length of trailer. Drains thru to bottom deck of crate.
FRONT: 3mm crimped lyten sheet headboard fully welded on inside. Ladder up center
Option: ¾ thru load w/- slam shut gates and spring assisted full width flap – top & bottom decks. Chains are fitted to gates. Thru load gates sheeted w/- 3.0mm alum sheet or crimped style lyten sheeting (fully welded on inside only)
REAR: ¾ thru load w/- slam shut gates & spring assisted full width flap – top and bottom decks
Option: ¾ sliding doors w/- thru load. Thru load gates sheeted w/- 3.0mm alum sheet or crimped steel lyten sheeting (fully welded on inside only)
PENS:

Two pens per deck. Bottom pen – 1 x ¾ swinging slam shut door top pen – 2 x ½ swinging slam shut to side frame when open. Swinging gates sheeted w/- 3.0mm alum sheet or crimped steel lyten sheeting (fully welded on one side only).
Option: 2 X ½ swinging slam shut doors on bottom deck. 3 piece sliding doors top and bottom.

CATWALK: Timber catwalk full length of crate.
Option: Gridmesh catwalk
RAMP: Full width 12’ ramp w/- single acting electric/ hydraulic power pack. Various options are available regarding positioning of ramp, powerpacks, remote controls, cylinders and the supply of batteries, solar panels, trickle feed etc.
SIDELOAD: All sideload doors are mounted with three heavy-duty hinges. Chains are fitted to doors
Option: Various options regarding the positioning, size and quantities of side load doors are available.
LIGHTS: Lights (wired in conduit) conforming to all relevant Australian Design Rules. LED front and rear marker lamps.
PAINT: Trailer is deburred and fully sandblasted prior to painting with 2 pak chemical resistant undercoat and PPG 2K finish coat to Fleet or custom colors (with scroll work to suit). 
Option: Various finishes are available including metallics, clear-over-base and chemical resistant paints.

 

THESE SPECIFICATIONS ARE A GUIDE ONLY, AS EACH RHINO TRAILER CAN BE DESIGNED AND MANUFACTURED TO SUIT THE CUSTOMER’S SPECIFIC REQUIREMENTS

57 - 75 Industrial Avenue, Toowoomba, QLD, 4350                                                                  (07) 4634 7767